FINALIT NO. 22 COOL IMPREGNATION

We recommend pre-treatment with Finalit No. 21 or 21S!

Especially suitable for polished surfaces & fine stoneware, high solvent content.

• The Goretex effect
• Medium-term, transparent protection against stains and soiling
• Resistant to UV-rays, de-icing salt, chlorine
• Breathable / food safe
• Penetrates up to 2cm into the surface depending on the absorbency.
• Excellent graffiti protection
• Synthetic polymer
• Does not contain wax, silicone or acrylate
• Stain-resistant and water-resistant
• Grain size: micro to nano
• Solvent: odourless white spirit
• For all natural and artificial stones!

• Use undiluted
• 1 l is sufficient for 100 m²
• The temperature of the object must be above +10°C. The surface to be treated must be clean and dry.
• With highly absorbant materials, apply Finalit No. 21 Fixative Penetrating Stopper or Finalit No. 21S • • Pores Filler before treating with Finalit No. 22 Cool Impregnation.
• Apply Finalit No. 22 undiluted to the clean and dry surface (1 to 2 times depending on surface absorbing capacity), spreading it evenly
• Especially with polished materials, wipe off any surplus of Finalit No. 22 with a cloth immediately after application.
• The drying time is approx. 1 - 2 hours, the curing time is 24 hours.
• If streaks form (you have applied too much), then treat with hot air or apply Finalit No. 22 again and wipe off immediately with a cloth
• Can be polished using white synthetic pads and a high-speed machine. Recommended for polished floors.
• You need to make your own tests.

• Finalit No. 22 does not form a closed film, which prevents flaking from occurring
• Finalit No. 22 penetrates up to 5 mm into the surface depending on the absorbency
• The surfaces treated are breathable and resistant to water, stains, UV-rays and de-icing salt

Azerbaijan: Port of Baku - JW Marriott Absheron Hotel
Azerbaijan: Port of Baku - 28 May Shopping Mall
Azerbaijan: Port of Baku - Port Baku Towers
Greece: New promenade at Thessaloniki