FINALIT NO. 9 LIME AND CEMENT BLOOM REMOVER (ACIDIC)

ATTENTION! Remove any coatings beforehand using Finalit No. 5 Coating Remover!
Moisten the surfaces with water before working and, where possible, apply from the bottom to the top!

Application areas:

• Large-scale removal of lime efflorescence
• Removes lime and cement residues
• Mortar and grouting residues
• Specialist for lime, salt and gypsum efflorescence
• Does not damage fine stoneware with metallic surfaces
• Suitable for all natural and artificial stones, except polished soft stone!

ATTENTION! Not suitable for polished softstone (e.g. marble, limestone)!
You need to make your own tests.

• Can be diluted up to 1:20 with water depending on the degree of soiling
• 1 l is sufficient for 80 m²
• Attention! Roughen up closed layers of lime with a coarse brush or sandpaper
• Using a brush or paint brush, apply diluted and rub in with a brush
• Exposure time is approx. 5 - 60 minutes, then brush off the product with a coarse brush
• Then thoroughly wash off with water
• Apply Finalit No.1 diluted 1:20 with water for neutralising
• Allow to act for about 5 – 10 minutes
• Then thoroughly rinse with water
• Suitable for all natural and artificial stones, except polished soft stone!

ATTENTION! Not suitable for polished softstone (e.g. marble, limestone)!
You need to make your own tests.

• Especially suitable for basic cleaning of fine stoneware and natural terracotta.
• Aluminium oxide (white pattern on the rear side; release agent so that the tile does not stick to the conveyor belt when burning at approx. 1.100°C!

Slovakia: Luxury Grand Hotel Kempinski High Tatras
Austria: Vienna West Train Station